Sharing of files and folders can be managed in two ways. If you chose simplified file sharing, your folders can be shared with everyone on your network or workgroup, or you can make your folders private. (This is how folders are shared in Windows 2000.) However, in Windows XP Professional, you can also set folder permissions for specific users or groups. To do this, you must first change the default setting, which is simple file sharing. To change this setting, follow these steps: •Click the View tab, and scroll to the bottom of the Advanced Settings list.
•Clear the Use simple file sharing (Recommended) check box.
•To manage folder permissions, browse to the folder in Windows Explorer, right–click the folder, and then click Properties. Click the Security tab, and assign permissions, such as Full Control, Modify, Read, and/or Write, to specific users.
You can set file and folder permissions only on drives formatted to use NTFS, and you must be the owner or have been granted permission to do so by the owner.
How to Convert a FAT Partition to NTFS
To convert a FAT partition to NTFS, perform the following steps.
Click Start, click Programs, and then click Command Prompt.
In Windows XP, click Start, and then click Run.
At the command prompt, type CONVERT [driveletter]: /FS:NTFS.
Convert.exe will attempt to convert the partition to NTFS.
NOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency repair disk (ERD).
Convert.exe will attempt to convert the partition to NTFS.
Adding Programs To Stay On The Start Menu
Right click on any .exe file in Explorer, My Computer, Desktop and select 'Pin to Start Menu', the program is then displayed on the start menu, above the separator line. To remove it, click the file on the start menu and select 'Unpin from Start Menu'. Below you can check the before and after shots.
Right click on any .exe file in Explorer, My Computer, Desktop and select 'Pin to Start Menu', the program is then displayed on the start menu, above the separator line. To remove it, click the file on the start menu and select 'Unpin from Start Menu'. Below you can check the before and after shots.
How to Write a Windows XP Driver
Source: Microsoft Corporation July 2001
Source: Microsoft Corporation July 2001
Summary: This document describes the steps you should take to create a Microsoft® Windows® XP driver for your device. To create a Windows XP device driver:
· Install the current Windows DDK. Read the system requirements and installation instructions in the stand-alone Getting Started HTML file supplied with the DDK.
· Read Getting Started with Windows Drivers. This document guides you through the planning and decision-making process involved in making a Windows device driver from design through distribution. You should also look through the DDK documentation for device-type-specific information.
The DDK documentation set has the following device-type-specific nodes:
· Battery Devices
· Display and Print Devices
· IEEE 1284.4 Devices
· Interactive Input Devices
· Modem Devices
· Multifunction Devices
· Network Devices and Protocols
· Parallel Ports
· Serial Ports
· Smart Card Devices
· Still Image Devices
· Storage Devices
· Streaming Devices (Video and Audio)
· Devices Requiring VDDs
· IDE bus are described in System Support for Buses. Driver development for most device types also requires a strong understanding of Windows operating system fundamentals, which are described in Kernel-Mode Driver Architecture.
· Look through the driver source code provided with the DDK for a sample that represents your device type. Use the sample code where possible, modifying it for your device's specifics.
· The sample code can enhance your understanding of Windows XP driver implementation requirements and speed your development time.
· Compile and build your driver. This should be done using the Build utility and not some other compiler, because the Build utility has certain features that are necessary for driver development.
· Obtain a checked build of Windows XP, so that you can test and debug your driver using free and checked system builds.
· The checked build of Windows XP provides extensive kernel-mode debugging capabilities not available in the free build.
· Create an INF file so that you can install and test your driver.
· Test and debug your driver. You should use Driver Verifier, a program that puts your driver through a variety of tests, stresses, and deliberate failures in order to test its response and reliability in many extreme situations. You should also use a debugger. Microsoft provides several powerful debuggers that can monitor and debug kernel-mode and user-mode drivers.
Using Driver Verifier in conjunction with these debuggers, on both the checked and free versions of the operating system, can be a powerful way to test your driver.
Using Driver Verifier in conjunction with these debuggers, on both the checked and free versions of the operating system, can be a powerful way to test your driver.
· Provide an installation package so that customers can install devices that use your driver.
· Submit your driver and installation package to Microsoft so that it can be digitally signed.
There are many resources available to you while developing your driver. The following sites describe some of the support available to you:
· http://www.microsoft.com/ddk describes how to obtain the current DDK and provides other information, such as a driver development reading list.
· http://www.microsoft.com/hwdev provides information, such as device-type-specific white papers and late-breaking news, and a list of resources available to driver developers.
· http://support.microsoft.com/support/ddk contains DDK product support information.
XP File Sharing and Permissions
File sharing and permissions in Windows XP seem complicated.
Microsoft provides a Knowledge Base article, but reading it is like walking through molasses: It describes in infinite detail a file security system based on a 1-to-5 scale. However, if you look for this 1-to-5 scale anywhere in your security-settings interface, you may come away a little confused. These numbers are nowhere to be found.
Microsoft's 1-to-5 scale means nothing to the individual user and relates in no way to the actual practice of setting your security protocols. Enter the Screen Savers. We are here to explain it to you.
The security settings the user actually sets relate to read access, write access, shared folders, and password protection. These features are available in both Windows XP Home Edition and Windows XP Professional, however the features only work if the operating system is installed with NTFS. FAT32 does not support the file permissions described here.
You can choose to install Windows XP Home using NTFS, but you should use a FAT32 file system if you are dual booting and want to see the contents of your Windows 95, 98, or Me partition from your XP partition. Your file system is not set in stone when you install Windows XP. You always can change your file system from FAT32 to NTFS without losing any of your data; however, the transition is one-way only.
There is no going back to FAT32 from NTFS unless you grab a copy of Partition Magic. Microsoft recommends you install Windows XP Home with FAT32 if you intend to install more than one OS on your computer or if your hard drive is less than 32GB.
If you have Windows XP Home or Professional running NTFS, you can hide files and entire folders from prying eyes. When you set up multiple user accounts on one machine, any user with administrator access can view the documents in another's My Documents folders. To protect a folder, right-click it, choose Properties, the Share tab, and select "make this folder private." No one, not even a fellow system administrator, can access these most secret files.
Every file or folder contained within whichever folder you choose to make private will take on the settings of the parent folder. If the administrator does not have a password to the account, Windows XP will prompt the user to make a password or risk subjecting his or her private work to public scrutiny. No Windows password means no protected files.
A person who logs in as a guest or as a user without administrator privileges cannot see the contents of any other user's My Documents folder, even if the folder has not been explicitly made private. The user with limited privileges can, however, set a password and protect his or her documents from the prying eyes of the administrators. Windows XP is all about privacy.
It is a nice feeling to keep your personal tax documents secure from the passing lookey-loo. It's about time Microsoft made snooping your computer more difficult than snooping your medicine cabinet.
Make XP display a custom screen saver using your very own pictures
It used to be darn near impossible to create a personal screen saver using your own photo collection. To do this, you had to track down a third-party application and sloppily piece together your pictures to create a screen saver.
Well, the engineers at Microsoft must have realized they hated third-party applications and decided enough was enough. XP can take any pictures stored in your "My Pictures" folder and display them in random order as a screen saver.
To make a personal screen saver in XP, follow these directions:
Right-click an empty spot on your desktop and choose Properties.
Click the Screen Saver tab inside the Display Properties dialog box.
In the Screen Saver pull-down menu, choose "My Pictures Slideshow."
Underneath the Screen Saver pull-down menu, adjust the time of inactivity before Windows will initiate your screen saver.
Click Settings to make additional adjustments. You'll be able to adjust transition effects between pictures, how frequently they change, what size the pictures should be, and more.
Click OK when you're done tweaking the settings adjustments.
Press the Preview button to see what your screen saver looks like.
If everything is to your liking, click Apply.
Click the Screen Saver tab inside the Display Properties dialog box.
In the Screen Saver pull-down menu, choose "My Pictures Slideshow."
Underneath the Screen Saver pull-down menu, adjust the time of inactivity before Windows will initiate your screen saver.
Click Settings to make additional adjustments. You'll be able to adjust transition effects between pictures, how frequently they change, what size the pictures should be, and more.
Click OK when you're done tweaking the settings adjustments.
Press the Preview button to see what your screen saver looks like.
If everything is to your liking, click Apply.
YOUR COMPANY AD HERE
JUST 500/month
